Cake dough is cut in lines with circular blades after it is cooked. Cream is wiped on on the dough at the bottom. Then the second layer of the cake dough has been put on the other one. Now it is time to cut in the length desired. At this point, there are 2 alternatives. One is traditional blade and the other option is Ultrasonic food slicer with titanium blade. When the cake has cream inside, the unique option is Ultrasonic cutting due to cream adhesion. When the normal blade goes into the cake, the cream sticks to the blade and after 100 pcs, the cream becomes hard on the blade. In the next cuttings, slices the outside is deformed. In order to prevent this sticky cream, Ultrasonic vibrations are used. Because Ultrasonic blade is vibrating while it is slicing so the cream can not stick to the Ultrasonic vibrating blade. As the Ultrasonic blade is made of titanium, it is also suitable for food industry.
WANLI Ultrasonic Automatic Triangle Cutting Machine
Ultrasonic Triangle Cutting Machine is designed for diagonal cutting of rectangular products. The diagonal cutting of the production line has the advantages of high production efficiency and precision, cutting the bread diagonally, clear water chestnut, clean and tidy section. This product cut 50-60 per minute / min, automatic feeding, a key to start, automatic cutting, automatic discharge. After the equipment is started, the bread enters the cutting center along the guide bar, and the end of the guide bar is provided with a baffle to block the breads together and send it to the cutting position; after the bread is detected by the equipment, the ultrasonic cutting knife and the conveyor belt are cut at the same speed Knife to move up and down once, along the diagonal bread cut into two, cut back immediately after the original position to wait for the next bread.
Cake dough is cut in lines with circular blades after it is cooked. Cream is wiped on on the dough at the bottom. Then the second layer of the cake dough has been put on the other one. Now it is time to cut in the length desired. At this point, there are 2 alternatives. One is traditional blade and the other option is Ultrasonic food slicer with titanium blade. When the cake has cream inside, the unique option is Ultrasonic cutting due to cream adhesion. When the normal blade goes into the cake, the cream sticks to the blade and after 100 pcs, the cream becomes hard on the blade. In the next cuttings, slices the outside is deformed. In order to prevent this sticky cream, Ultrasonic vibrations are used. Because Ultrasonic blade is vibrating while it is slicing so the cream can not stick to the Ultrasonic vibrating blade. As the Ultrasonic blade is made of titanium, it is also suitable for food industry.
Advantage of ultrasonic banana bread slicer
1. Ultrasonic vibration reduces friction resistance between the blade and food, and it makes the blade cut smoothly without deformation.
2. The cutting blade is made of titanium. It is completely inert and enduring material.
3. Owing to it reduces the chips of food during cutting and fouling on the blade, you can reduce the down time to cleaning and increase the productivity.
Automated Ultrasonic Slicer For Cheese Logs Machine
This ultrasonic cutting machine can be used for cutting cheese. The cheese ultrasonic cutting machine adopts automatic frequency-tracking ultrasonic driving technology. It has simple application, powerful cutting power, no knife and no debris. The surface of the cut product is smooth and beautiful.
Can be equipped with blades of different specifications according to the cutting width of the product, and even customize the machine according to requirements.
Automated Ultrasonic Slicer For Cheese Logs Machine
This ultrasonic cutting machine can be used for cutting cheese. The cheese ultrasonic cutting machine adopts automatic frequency-tracking ultrasonic driving technology. It has simple application, powerful cutting power, no knife and no debris. The surface of the cut product is smooth and beautiful.
Can be equipped with blades of different specifications according to the cutting width of the product, and even customize the machine according to requirements.
Automated Ultrasonic Slicer For Cheese Logs Machine
This ultrasonic cutting machine can be used for cutting cheese. The cheese ultrasonic cutting machine adopts automatic frequency-tracking ultrasonic driving technology. It has simple application, powerful cutting power, no knife and no debris. The surface of the cut product is smooth and beautiful.
Can be equipped with blades of different specifications according to the cutting width of the product, and even customize the machine according to requirements.
This highly productive ultrasonic pizza cutter not only cuts the long pizza, but also cuts almost all of the long baked foods, such as cutting the long cake into triangular cakes. Ultrasonic cheesecake cutter’s main reason for slicing bakery products is to ensure that the exact size of the cut is minimized and the minimal cost of the waste is achieved, and this equipment will be able to meet the above requirements, which is a combination of high quality ultrasonic cheesecake pizza cutter and precision automated mechanical construction , To provide customers with fast, accurate and efficient automation solutions.
Ultrasonic Machine Ultrasonic Cutting for Cakes
When cutting food, the ultrasonic cutting knife vibrates at a frequency of 20, kHz (or 30 / 40kHz) so that food debris will not remain on the surface of the knife. The surface of the cut food is very clean, and the separation between the layers is kept clear. New research shows that higher frequency (30 and 40 kHz) ultrasonic cutters are good for cutting hot and sticky foods, and there is no noise during the entire process.
Ultrasonic cutting system due to routine cleaning and maintenance caused by the shutdown time can be reduced by 70% ~ 90% compared to traditional equipment. If customers who use traditional cutting equipment want to use ultrasonic technology to process food, they only need to make small changes in the existing equipment; or introduce a new system design based on the existing production design. In this regard, we have very rich experience.
Automatic Ultrasonic Cutting The Dough Machine
Ultrasonic cutting can reduce the pressure on the object to be cut by vibrating at a high frequency per second. In this way, a neat and clean cutting surface can be formed.
The advantage of ultrasonic cutting and edge banding technology is that it can quickly and accurately edge and cut food in continuous operation, and the cutting and edge banding are performed and completed at the same time.
Ultrasonic waves cut products accurately and quickly with less resistance through high-speed vibration, and achieve no residue, deformation and thermal damage on the product surface.
Using ultrasonic frequency to drive the cutter vibration can easily cut into the material, and it is very accurate and saves material.
Our Factory has developed a large range of expertise in the ultrasonic food cutting industry. This technique is used to overcome the deficiencies associated with conventional cutting. It eliminates problems related to food sticking on the blade and also improves the quality the cuts. Our equipment is designed for cutting pastry, bars and confectionery, cheeses, meats, prepared food and more.
Our automated equipment offers a high standard of safety and allows for continuous cutting on a production line or at a stand-alone station. We can tailor our equipment to your specifications.
Model:
Wanlisp4-300K1450L2000
Material:
Titanium Alloy
Ratde Voltage:
220V
Ultrasonic Cheesecake Slicer Machine for sale
Ultrasonic cake cutting machine is a fully automatic, high-performance food cutting equipment, with a multi-axis standard control system. In the actual production of food, it can be positioned and cut according to demand, and the operation can be completed automatically, greatly improving work efficiency. Use economic purchases to maximize benefits.
Complete or Modular Ultrasonic Slitting and Guillotine Cutting Machines
Ultrasonic food cutting machine products are used by many of the largest and most prestigious food producers, worldwide. Ultrasonic food cutting, and processing provides new ways to cut, slice, divert, align, or transfer a variety of food products that streamlines production, minimizes product waste, and lowers maintenance costs. Ultrasonic technology uses high-frequency sound vibrations to process food products faster. It is safe, reliable and yields a higher quality finished product with minimized cleaning or production stops.
WANLI develops ultrasonic food slicing equipment, which is an independent ultrasonic food cutting equipment. It can be used to cut bakery, frozen food, snack food, cutting patterns. Various rectangular, square, triangular, diamond and fan shape. Company or bakery. This ultrasonic food cutting economical equipment is equipped with high quality titanium alloy cutting tools, which is developed by WANLI to achieve the best cutting effect.
In order to extend practical applications of ultrasonic cutting in food processing, a novel kinematic mechanism is proposed to satisfy motions of ultrasonic cutting equipment.
Practical ApplicationsTo evaluate ultrasonic cutting of foods, on the one hand, we have compared the principles of two methods, which are ultrasonic cutting of foods and conventional cutting of foods; on the other hand, we have investigated the performance of ultrasonic cutting of different materials, such as bread, rye bread and cake. The Results and Discussion section shows that ultrasonic cutting in the industry has not only general benefits and advantages, such as excellent cut surface, reduced crumbling, squeezing, debris and smearing, but also a special advantage, such as cutting thin slice, which cannot be realized by conventional cutting of foods.
NEWS
Send Your Inquiry Today
