A abun yanka za a iya raba biyar Categories bisa ga nau'i na workpiece aiki surface. Kayan aikin da ake amfani da su don yanke itace ta hanyar ultrasonic slitter ana kiran su kayan aikin katako. Waɗannan kayan zagaye maras ƙarfe suna ba da damar slitter ruwan wukake don yanke a cikin sauri mafi girma. A 1898, Taylor da Amurka. Farin ƙarfe ya ƙirƙira babban gudun. An rubuta wallafe-wallafen da aka kirkira game da atisayen murda a shekarar 1822, amma ba a samar da su a matsayin kayayyaki ba sai a shekarar 1864. Tun daga karni na 28 zuwa na 20 kafin haihuwar Annabi Isa, a kasar Sin, an samu bullar tagulla da zantuka na kayan aikin tagulla, irin su mazugi na tagulla, da mazugi, da wukake, da dai sauransu, wadanda suka yi kama da na zamani.
Gilashin slitter a wancan lokacin an yi su ne da ƙarfe na kayan aiki na carbon, kuma saurin yankan da aka yarda ya kai kusan mita 5 / minti. A shekara ta 1923, Schleitel na Jamus ya ƙirƙira simintin carbide. Domin slitter ruwan wukake da ake amfani da su wajen kera injina ana amfani da su ne don yanke kayan ƙarfe, ana fahimtar kalmar “wuƙa” azaman ƙwanƙolin yankan ƙarfe. Hanyar da ake amfani da ita ta haɗu da ƙarfin ƙarfi da ƙarfi na kayan tushe tare da tsayin daka mai tsayi da juriya na farfajiyar ƙasa, don haka wannan kayan haɗin gwiwar yana da kyakkyawan aikin yankewa. A cikin 1792, Mozley a Burtaniya ya samar da famfo kuma ya mutu.
Duk da haka, saurin ci gaban slitter ruwan wukake ya zo a ƙarshen karni na 18 tare da haɓaka injin tururi da sauran injuna.
Lokacin amfani da kayan aiki na alloy, ana inganta saurin yanke na slitter zuwa kusan mita 8 a cikin minti daya, lokacin amfani da ƙarfe mai sauri, ya ninka fiye da ninki biyu, kuma lokacin amfani da kayan aiki mai ƙarfi, ya ninka fiye da amfani da ƙarfe mai sauri. The surface ingancin da girma daidaito na workpiece sarrafa ta yankan an kuma ƙwarai inganta.
Saboda farashin karfe mai sauri da siminti na siminti yana da tsada sosai, slitter gefuna gabaɗaya ana welded kuma an haɗa su da injina. A cikin 1972, General Electric ya samar da lu'u-lu'u na roba na polycrystalline da polycrystalline cubic boron nitride ruwan wukake. A shekara ta 1783, René a Faransa ya fara samar da abin yankan niƙa.
Slitting inji ruwa kayan aiki ne da ake amfani da shi don yankan a masana'anta, wanda kuma aka sani da yankan madauwari ruwa. Daga 1949 zuwa 1950, {asar Amirka ta fara amfani da na'urorin da za a iya amfani da su wajen jujjuya kayan aikin, kuma nan da nan ta yi amfani da kayan aikin niƙa da sauran kayan aiki. A shekara ta 1972, Bangsha da Laglan na Amurka sun ƙirƙiri hanyar sanya tururi ta jiki don yin sutura mai kauri na titanium carbide ko titanium nitride a saman na'urar carbide ko babban sigar slitter karfe. A shekara ta 1868, Mushete a Burtaniya ya yi kayan aikin gami da ƙarfe mai ɗauke da tungsten. Kayan aiki don sarrafa sassa daban-daban na waje, gami da kayan aikin juyawa, masu tsarawa, masu yankan niƙa, buɗaɗɗen saman waje da fayiloli, da sauransu; Ramin sarrafa kayan aikin, ciki har da drills, reamers, m kayan aikin, reamers da ciki surface broaches, da dai sauransu .; Zaren sarrafa Tools, ciki har da famfo, mutu, atomatik bude da kuma rufe thread yankan shugabannin, zare juya kayan aikin da thread milling cutters, da dai sauransu .; kayan aikin sarrafa kaya, gami da hob, mai siffar kaya, abin yankan aski, kayan aikin sarrafa kayan bevel, da sauransu.; kayan aikin toshewa, gami da abubuwan da ake sakawa madauwari saw ruwan wukake, tsatson igiya, ƙwanƙolin baka, kayan aikin juyawa da ga masu yankan ruwa, da dai sauransu. A cikin ƙarshen zamanin Warring States Period (ƙarni na uku BC), saboda fasahar carburizing, an yi wuƙaƙen jan karfe.
